Assembly settings

Caractéristiques électriques

Contacts

1 NC / 1 NO

1 NC / 1 NO

choisir ...

1 C
1 NC
1 NC / 1 FS
1 NC / 1 NO
1 NC / 2 NO
1 NO
2 C
2 NC
2 NC / 1 NO
2 NC / 2 NO
2 NO
3 NC
3 NO

Switching rating

250 V AC @ 6 A

250 V AC @ 6 A

choisir ...

150 V AC/DC @ 3 A
150 V AC/DC @ 5 A
24 V DC @ 0,2 A
240 V
240 V @ 3 A
240 V AC @ 3 A
250 V
250 V @ 3 A
250 V @ 5 A
250 V AC @ 1,5 A
250 V AC @ 3 A
250 V AC @ 6 A
250 V AC/DC
250 V AC/DC @ 5 A
30 V DC @ 0,1 A
35 V @ 3 A
35 V AC/DC @ 0,6 A
36 V AC/DC @ 0,6 A
400 V @ 10 A
42 V
42 V @ 0,1 A
42 V AC @ 0,1 A
42 V AC/DC @ 0,1 A
42 V DC @ 0,1 A
48 V DC @ 0,5 A
5 A
50 V @ 0,1 A
50 V @ 0,8 A
50 V AC/DC @ 0,2 A
50 V AC/DC @ 0,3 A
500 V @ 10 A
500 V AC @ 10 A
500 V AC @ 6 A
600 V AC @ 1,2 A

Caractéristiques mécaniques

Terminal

Push-in terminal

Push-in terminal

choisir ...

1.5 Series AMP Superseal 3 Pin Connector
Cable 200 mm, 180°
Cable 200 mm, 180°, Conntector M12
Cable 200 mm, 90°
Cable 200 mm, 90°, Connector M12
Connector M12
Connector M12 (5 pins)
Deutsch DT04-6P
Double plug-in terminal, 6.3 x 0.8 mm
Flat ribbon cable
Flat ribbon cable 300 mm
PCB terminal
Plug-in terminal
Plug-in terminal, 2 x 0.5 mm
Plug-in terminal, 2.8 x 0.5 mm
Plug-in terminal, 2.8 x 0.8 mm
Plug-in terminal, 6.3 x 0.8 mm
Push-in terminal
Ring cable lug screw terminal
Screw terminal
Soldering terminal
Soldering terminal, 2.8 x 0.5 mm
Spring-type terminal
TE 8P-1745000-3
USB 3.0 socket type A-A
USB 3.0 socket type C-A
Universal terminal, 2 x 0.5 mm
Würth Elektronik WR-MPC3, 16 Pins

Switching system

Slow-make switching element

Slow-make switching element

choisir ...

Capacitive
Low-level element
Short-travel element
Slow-make switching element
Snap-action switching element

Contact material

Gold

Gold

choisir ...

Gold
Gold-plated silver
Palladium
Rhodium/Silver
Silver

Retour

Distribution par
Newark

https://newark.eao.com/component/704.917.5/fr...

Switching element - Not recommended for new design

Name: Switching element - Not recommended for new design
Brand: EAO
SKU: 704.917.5
Price: 122.74 USD
Availability: OutOfStock

704.917.5

0 en stock 122.74 USD

Ajouter au panier

Votre produit:

704.917.5 Switching element - Not recommended for new design

122.74 USD0 en stock

Gamme de produits

Product Status:: Not Recommended for new design
successor product:: https://www.eao.com/c/704.917.5-1

Caractéristiques électriques

Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage	DC13	AC15
24 V	4.0 A	8.0 A
60 V	1.5 A	8.0 A
110 V	1.0 A
120 V		8.0 A
230 V	0.4 A	7.0 A
400 V	0.2 A	5.0 A
500 V	0.15 A	4.0 A

as per UL 60947-5-1
voltage	power
24 VDC	4.0 A, Pilot duty
60 VDC	1.5 A, Pilot duty
120 VDC	1.0 A, Pilot duty
240 VDC	0.4 A, Pilot duty
415 VDC	0.2 A, Pilot duty
480 VDC	0.14A, Pilot duty

120 VAC	8.0 A, Pilot duty
240 VAC	7.0 A, Pilot duty
415 VAC	5.0 A, Pilot duty
480 VAC	4.0 A, Pilot duty

Contacts:

1 NC / 1 NO

Rated impulse withstand voltage Uimp:

4 kV, according to EN/IEC 60947-5-1

Rated insulation voltage Ui:

500 V

Recommended minimum operational data:

Gold-silver contacts
Voltage	24 VDC
Current	5 mA

Hard silver contacts
Voltage	24 VDC
Current	50 mA

Switching rating:

250 V AC @ 6 A

Electrical lifetime:

50 000 cycles of operation

Pollution degree:

Standards:

The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1

Thermal current Ith:

6 A 10 A Max. zulässiger Strom bei Dauerbetrieb und Umgebungstemperaturen, welche die angegebenen max. Werte nicht überschreiten. 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.

Caractéristiques mécaniques

Terminal:: Push-in terminal
Contact material:: Gold
Switching system:: Slow-make switching element
Switching system:: The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:: 1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Wire cross section:: Max. wire cross-section 2 wires with 1 mm
Skinning wire 8 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
use stranded wires only with wire end ferrules of 8 mm length
Only one polarity is allowed on each side when wiring.
Weight:: 0.028 kg

Conditions environnementales

IP Protection:: IP20
Operating temperature:: – 40 °C … + 55 °C
Storage temperature:: – 40 °C … + 85 °C
Shock resistance:: 300 m/s², pulse width 18 ms, (single impacts, semi-sinusoidal as per EN IEC 60068-2-27)
Climate resistance:: Relative humidity, max. 95%, non-condensing

Certificats

Approbations:: CB (IEC 60947-5-1), cULus, DNV, EAC, NFF, VDE
Conformities:: CE, CCC, UKCA
REACH:: REACH compliant
RoHS:: RoHS compliant

Autres

Short Description:

Switching element - Not recommended for new design, Slow-make switching element, 250 V AC @ 6 A, Gold, 1 NC / 1 NO, Push-in terminal

Hints:

When using the switching element, the application guidelines must be observed.

For the third switching element the terminal marking insert is to be ordered separately

Operating temperature: Other temperatures on request

Special requirements:

Special requirements for positive-opening auxiliary current switches
Positive opening travel	Emergency stop 12.5 mm
Minimum force	Emergency stop 50 N (actuating force at which is safely switched)
Max. travel	Emergency stop 12.5 mm

Wiring diagrams:

Dimension drawings:

A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm

Télécharger des fichiers

0 en stock 122.74 USD

Ajouter au panier