배포에 의한
Newark
제품 내 구성 요소 보기
Assembly settings
전기적 특성
Contacts
2 NO

2 NO

선택하다 ...
  • 1 C
  • 1 NC
  • 1 NC / 1 FS
  • 1 NC / 1 NO
  • 1 NC / 2 NO
  • 1 NO
  • 2 C
  • 2 NC
  • 2 NC / 1 NO
  • 2 NC / 2 NO
  • 2 NO
  • 3 NC
  • 3 NO
Switching rating
250 V AC @ 6 A

250 V AC @ 6 A

선택하다 ...
  • 150 V AC/DC @ 3 A
  • 150 V AC/DC @ 5 A
  • 24 V DC @ 0,2 A
  • 240 V
  • 240 V @ 3 A
  • 240 V AC @ 3 A
  • 250 V
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 250 V AC @ 1,5 A
  • 250 V AC @ 3 A
  • 250 V AC @ 6 A
  • 250 V AC/DC
  • 250 V AC/DC @ 5 A
  • 30 V DC @ 0,1 A
  • 35 V @ 3 A
  • 35 V AC/DC @ 0,6 A
  • 36 V AC/DC @ 0,6 A
  • 400 V @ 10 A
  • 42 V
  • 42 V @ 0,1 A
  • 42 V AC @ 0,1 A
  • 42 V AC/DC @ 0,1 A
  • 42 V DC @ 0,1 A
  • 48 V DC @ 0,5 A
  • 5 A
  • 50 V @ 0,1 A
  • 50 V @ 0,8 A
  • 50 V AC/DC @ 0,2 A
  • 50 V AC/DC @ 0,3 A
  • 500 V @ 10 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
  • 600 V AC @ 1,2 A
기계적 특성
Terminal
Push-in terminal

Push-in terminal

선택하다 ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal terminal, 2 x 0.5 mm
Switching system
Snap-action switching element

Snap-action switching element

선택하다 ...
  • Capacitive
  • Low-level element
  • Short-travel element
  • Slow-make switching element
  • Snap-action switching element
Contact material
Gold

Gold

선택하다 ...
  • Gold
  • Gold-plated silver
  • Palladium
  • Rhodium/Silver
  • Silver
뒤로
상세 제품 개요 보기
배포에 의한
Newark

Switching element - Not recommended for new design

  • 704.907.3

704.907.3 Switching element - Not recommended for new design, Snap-action switching element, 250 V AC @ 6 A, Gold, 2 NO, Push-in terminal
704.907.3
최소 주문 수량 5
0 재고 있음 117.16 USD
장바구니에 담기
귀사의 제품:
704.907.3

704.907.3

Switching element - Not recommended for new design

117.16 USD0 재고 있음
제품 라인업
Product Status:
Not Recommended for new design
successor product:
https://www.eao.com/c/704.907.3-1
전기적 특성
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

2,5 A

60 V

0,8 A

110 V

0,6 A

120 V

4,5 A

230 V

0,2 A

4,5 A

400 V

0,15 A

4,0 A

500 V

0,7 A

2,5 A

as per UL 60947-5-1

voltage

power

24 VDC

2,5 A, Pilot duty

60 VDC

0,8 A, Pilot duty

120 VDC

0,6 A, Pilot duty

240 VDC

0,2 A, Pilot duty

415 VDC

0,15 A, Pilot duty

480 VDC

0,07A, Pilot duty

120 VAC

4,5 A, Pilot duty

240 VAC

4,5 A, Pilot duty

415 VAC

4,0 A, Pilot duty

480 VAC

2,5 A, Pilot duty

Contacts:
2 NO
Rated impulse withstand voltage Uimp:
4 kV, according to EN/IEC 60947-5-1
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

Current

5 mA

Hard silver contacts

Voltage

24 VDC

Current

50 mA

Switching rating:
250 V AC @ 6 A
Electrical lifetime:
50 000 cycles of operation
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1
Thermal current Ith:
6 A 10 A Max. zulässiger Strom bei Dauerbetrieb und Umgebungstemperaturen, welche die angegebenen max. Werte nicht überschreiten. 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.
기계적 특성
Terminal:
Push-in terminal
Contact material:
Gold
Switching system:
Snap-action switching element
Switching system:
The double-break, snap-action switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The snap-action switching element is fitted with self-cleaning contacts.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Wire cross section:
Max. wire cross-section 2 wires with 1 mm
Skinning wire 8 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
use stranded wires only with wire end ferrules of 8 mm length
Only one polarity is allowed on each side when wiring.
Weight:
0.029 kg
주변 환경
IP Protection:
IP20
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
300 m/s², pulse width 18 ms, (single impacts, semi-sinusoidal as per EN IEC 60068-2-27)
Vibration resistance:
Max. 100 m/s² from 10 Hz ... 500 Hz (sinusoidal DIN EN 60068-2-6 and EN 61373, increased broad band noise, class 1B)
Climate resistance:
Relative humidity, max. 95%, non-condensing
증명서
Approbations:
CB (IEC 60947-5-1), cULus, DNV, EAC, NFF, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
기타
Short Description:
Switching element - Not recommended for new design, Snap-action switching element, 250 V AC @ 6 A, Gold, 2 NO, Push-in terminal
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
파일 다운로드
최소 주문 수량 5
0 재고 있음 117.16 USD
장바구니에 담기