Assembly settings

Caratteristiche elettriche

Contacts

2 NO

2 NO

scegliere ...

1 C
1 NC
1 NC / 1 FS
1 NC / 1 NO
1 NC / 2 NO
1 NO
2 C
2 NC
2 NC / 1 NO
2 NC / 2 NO
2 NO
3 NC
3 NO

Switching rating

250 V AC @ 6 A

250 V AC @ 6 A

scegliere ...

150 V AC/DC @ 3 A
150 V AC/DC @ 5 A
24 V DC @ 0,2 A
240 V
240 V @ 3 A
240 V AC @ 3 A
250 V
250 V @ 3 A
250 V @ 5 A
250 V AC @ 1,5 A
250 V AC @ 3 A
250 V AC @ 6 A
250 V AC/DC
250 V AC/DC @ 5 A
30 V DC @ 0,1 A
35 V @ 3 A
35 V AC/DC @ 0,6 A
36 V AC/DC @ 0,6 A
400 V @ 10 A
42 V
42 V @ 0,1 A
42 V AC @ 0,1 A
42 V AC/DC @ 0,1 A
42 V DC @ 0,1 A
48 V DC @ 0,5 A
5 A
50 V @ 0,1 A
50 V @ 0,8 A
50 V AC/DC @ 0,2 A
50 V AC/DC @ 0,3 A
500 V @ 10 A
500 V AC @ 10 A
500 V AC @ 6 A
600 V AC @ 1,2 A

Caratteristiche meccaniche

Terminal

Push-in terminal

Push-in terminal

scegliere ...

1.5 Series AMP Superseal 3 Pin Connector
Cable 200 mm, 180°
Cable 200 mm, 180°, Conntector M12
Cable 200 mm, 90°
Cable 200 mm, 90°, Connector M12
Connector M12
Connector M12 (5 pins)
Double plug-in terminal, 6.3 x 0.8 mm
Flat ribbon cable
Flat ribbon cable 300 mm
PCB terminal
Plug-in terminal
Plug-in terminal, 2 x 0.5 mm
Plug-in terminal, 2.8 x 0.5 mm
Plug-in terminal, 2.8 x 0.8 mm
Plug-in terminal, 6.3 x 0.8 mm
Push-in terminal
Ring cable lug screw terminal
Screw terminal
Soldering terminal
Soldering terminal, 2.8 x 0.5 mm
Spring-type terminal
USB 3.0 socket type A-A
USB 3.0 socket type C-A
Universal terminal, 2 x 0.5 mm

Switching system

Snap-action switching element

Snap-action switching element

scegliere ...

Capacitive
Low-level element
Short-travel element
Slow-make switching element
Snap-action switching element

Contact material

Gold

Gold

scegliere ...

Gold
Gold-plated silver
Palladium
Rhodium/Silver
Silver

Indietro

Distribuzione attraverso
Newark

https://newark.eao.com/component/704.907.3/it...

Switching element - Not recommended for new design

Name: Switching element - Not recommended for new design
Brand: EAO
SKU: 704.907.3
Price: 117.16 USD
Availability: OutOfStock

704.907.3

0 in magazzino 117.16 USD

Aggiungi al carrello

Il vostro prodotto:

704.907.3 Switching element - Not recommended for new design

117.16 USD0 in magazzino

Gamma di prodotti

Product Status:: Not Recommended for new design
successor product:: https://www.eao.com/c/704.907.3-1

Caratteristiche elettriche

Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage	DC13	AC15
24 V	2,5 A
60 V	0,8 A
110 V	0,6 A
120 V		4,5 A
230 V	0,2 A	4,5 A
400 V	0,15 A	4,0 A
500 V	0,7 A	2,5 A

as per UL 60947-5-1
voltage	power
24 VDC	2,5 A, Pilot duty
60 VDC	0,8 A, Pilot duty
120 VDC	0,6 A, Pilot duty
240 VDC	0,2 A, Pilot duty
415 VDC	0,15 A, Pilot duty
480 VDC	0,07A, Pilot duty

120 VAC	4,5 A, Pilot duty
240 VAC	4,5 A, Pilot duty
415 VAC	4,0 A, Pilot duty
480 VAC	2,5 A, Pilot duty

Contacts:

2 NO

Rated impulse withstand voltage Uimp:

4 kV, according to EN/IEC 60947-5-1

Rated insulation voltage Ui:

500 V

Recommended minimum operational data:

Gold-silver contacts
Voltage	24 VDC
Current	5 mA

Hard silver contacts
Voltage	24 VDC
Current	50 mA

Switching rating:

250 V AC @ 6 A

Electrical lifetime:

50 000 cycles of operation

Pollution degree:

Standards:

The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1

Thermal current Ith:

6 A 10 A Max. zulässiger Strom bei Dauerbetrieb und Umgebungstemperaturen, welche die angegebenen max. Werte nicht überschreiten. 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.

Caratteristiche meccaniche

Terminal:: Push-in terminal
Contact material:: Gold
Switching system:: Snap-action switching element
Switching system:: The double-break, snap-action switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The snap-action switching element is fitted with self-cleaning contacts.
Operating force:: 1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Wire cross section:: Max. wire cross-section 2 wires with 1 mm
Skinning wire 8 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
use stranded wires only with wire end ferrules of 8 mm length
Only one polarity is allowed on each side when wiring.
Weight:: 0.029 kg

Condizioni ambientali

IP Protection:: IP20
Operating temperature:: – 40 °C … + 55 °C
Storage temperature:: – 40 °C … + 85 °C
Shock resistance:: 300 m/s², pulse width 18 ms, (single impacts, semi-sinusoidal as per EN IEC 60068-2-27)
Vibration resistance:: Max. 100 m/s² from 10 Hz ... 500 Hz (sinusoidal DIN EN 60068-2-6 and EN 61373, increased broad band noise, class 1B)
Climate resistance:: Relative humidity, max. 95%, non-condensing

Certificati

Approbations:: CB (IEC 60947-5-1), cULus, DNV, EAC, NFF, VDE
Conformities:: CE, CCC, UKCA
REACH:: REACH compliant
RoHS:: RoHS compliant

Di più

Short Description:: Switching element - Not recommended for new design, Snap-action switching element, 250 V AC @ 6 A, Gold, 2 NO, Push-in terminal
Hints:: When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
Wiring diagrams:
Dimension drawings:: A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm

Scarica i file

0 in magazzino 117.16 USD

Aggiungi al carrello